Miniature Linear Guides

0 投票
3 浏览
最新提问 11月 28 分类:入门专区 | 用户: ttf1126
TRN7C miniature guide rail is 7mm wide, standard length block.
TRN7H miniature guide rail is 7mm wide, extended block.
The TRN7C/TRN7H miniature linear guide has corrosion resistance, compact structure, high rigidity,high load capacity and interchangeable with IKO and HIWIN products.
The TRN7C/TRN7H mini linear guideways are mainly used in medical equipment, electronic equipment and linear motors.
ModelHH1NW1W2W3L1L2L3L4MxdH3Weight
TRN7C81.5517122.523.5814.3-M2x2.51.510g
TRN7H81.5517122.5311221.6-M2x2.51.514g
TRN9C1025.520152.5301020.8-M3x32.219g
TRN9H1025.520152.540.51530.9-M3x32.228g
TRN12C1337.527203.5341521.6-M3x3.52.735g
TRN12H1337.527203.5442032-M3x3.52.752g
TRN15C1648.532253.5422027.8-M3x43.164g
TRN15H1648.532253.5572542.762M3x43.195g
Data unit is mm
A bushing, also known as a bush, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing.[8] Common designs include solid (sleeve and flanged), split, and clenched bushings. A sleeve, split, or clenched bushing is only a "sleeve" of material with an inner diameter (ID), outer diameter (OD), and length. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench (or clinch) across the cut connecting the parts. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD. The flange is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.[9]
Sleeve bearings of inch dimensions are almost exclusively dimensioned using the SAE numbering system. The numbering system uses the format -XXYY-ZZ, where XX is the ID in sixteenths of an inch, YY is the OD in sixteenths of an inch, and ZZ is the length in eighths of an inch.[10] Metric sizes also exist.
A linear bushing is not usually pressed into a housing, but rather secured with a radial feature. Two such examples include two retaining rings, or a ring that is molded onto the OD of the bushing that matches with a groove in the housing. This is usually a more durable way to retain the bushing, because the forces acting on the bushing could press it out.
The thrust form of a bushing is conventionally called a thrust washer.Miniature Linear Guides
website:http://www.chtrmotion.com/miniature-linear-guides/

你的回答

昵称(可选):
隐私:你的邮箱仅用于接收通知。
反垃圾邮件验证:
若要避免将来验证,请 登录 或者 注册
欢迎来到 Websoft9知乎 ,有什么不懂的可以尽管在这里提问,你将会收到社区其他成员的回答。
...